Alarms Screen - Huawei UPS5000-E Series User Manual

UPS5000-E-(25 kVA-125 kVA)
User Manual (25 kVA power modules)


Environment Data
Figure 4-16
Figure 4-16 Environment Data screen



4.1.3.3 Alarms Screen

On the System Info. screen, tap
can view active alarms and historical alarms, clear faults, and buzzer off, as shown in
4-17.
If you enable the buzzer, the buzzer buzzes when a critical alarm, a minor alarm, or a certain
warning is generated. If you mute the buzzer, it never buzzes.
Issue 06 (2020-01-10)
Bypass runtime (h)
Time for which the UPS runs in bypass mode
Inv. runtime (h)
Time for which the UPS runs in normal mode
The value takes an integer. For example.
 If the value is less than 1, the value takes 0.
 If the value is greater than 1 and less than 2, the value takes 1.
shows the Environment Data screen.
Ambient temperature (° C)
Temperature measured by the ambient temperature and humidity sensor (Install the
sensor. If the sensor is not installed, NA is displayed.)
Ambient humid. (%)
Humidity measured by the ambient temperature and humidity sensor (Install the sensor.
If the sensor is not installed, NA is displayed.)
Copyright © Huawei Technologies Co., Ltd.
to enter the Alarms screen. On the Alarms screen, you
4 User Interface
Figure
88