Table of Contents
Advertisement
-
- Press the key "
".
At this point all the fans switch to minimum speed.
- Check that the parameters are the same as those in the
table below.
Values of CO
for operating at
2
MINIMUM POWER
G20
G25
G31
Mode
- Press the "
" button for more than two seconds to
exit the flue cleaning mode.
Once the calibrations are complete, carefully close the
plug of the combustion analysis socket.
b
All the calibration operations should be carried out
by the r Technical Assistance Centre.
54
TECHNICAL ASSISTANCE CENTRE
9 ± 0,1
8,9 ± 0,1
9,9 ± 0,1
Hide quick links:
Advertisement
Table of Contents
