HANDLING WITH ROLLERS
If the route to the installation area is flat, the boiler can be
moved with the use of rollers.
This requires at least 5 pipes roughly 900 mm long and
1"1/4 in diameter, or else commonly found transport roll-
ers can be used.
b
To avoid damaging the appliance the weight
should be equally distributed over all the rollers.
To move the appliance:
- Place the rollers on the floor at a distance of about 500
mm from each other.
- Slide the boiler from the pallet to the rollers and carefully
transport it to the installation area.
~ 900 mm
~ 500 mm
INSTALLER
27