Initial Commissioning - Riello ALU PRO power Series Instructions For The Installer And The Technical Assistance Centre

- Set the system's main switch and the main one of the
control panel to "on".
- The boiler switches on.
- The display shows the status of the system and the
temperature measured by the flow sensor.
- Set the room thermostat to the desired temperature
(20°C).
Ñ
- Press the button :
- with an outdoor temperature sensor: set the room
temperature setpoint
- with no outdoor temperature sensor: set the heating
circuit setpoint.
To adjust the setpoint use the keys "
Ñ
To exit press the button
The setting will be stored in memory.
+ -
" " ".
.

INITIAL COMMISSIONING

TECHNICAL ASSISTANCE CENTRE
47