Control Panel - Riello ALU PRO power Series Instructions For The Installer And The Technical Assistance Centre

CONTROL PANEL

BASIC INFORMATION / INTERFACE COMMANDS
CONTROL PANEL IN CLOSED POSITION
CONTROL PANEL IN OPEN POSITION
16
1 - Electrical power indicator (green)
Lights to show that the system is receiving electri-
cal power .
2 - Burner lockout indicator (red)
Lights to show that a burner lockout has occurred.
3 - DHW production on/off button
When active the symbol v appears on the display
4 - Main switch
5 - Button regulating heating temperature or room
temperature setpoint
6 - Display
7 - Button for selecting operating mode.
A line appears under the symbols:
s Automatic:
the set program
o Continuous: continuous mode
l Reduced:
b Stand-by
16
GENERAL
3 4 5
15 14 13 12
the boiler functions according to
reduced mode
1 2
6 7
11 10 9 8
8 - Information button
9-10 - Button for changing parameter value
11 - Fuse (accessed by slightly turning the control
panel)
12-13 - Buttons for electing parameters
14 - Button for regulating DHW temperature
15 - Reset button
Restores normal functioning after a safety shut-
down
16 - Safety thermostat with manual reset (accessed by
slightly turning the control panel)