Page 1
REV. ARRAY 2.0 N°1 IRMWARE UPDATE FOR OUCH CREEN RRAY Revision Date Author Verified Approved Description A.00 01/10/2019 Andrea De Carolis • First Release A.01 22/11/19 Andrea De Carolis • Updating SW version Riello SpA - Riello Proprietary and Confidential...
To update the firmware on a touchscreen the following items are required: • An USB stick (formatted according to the FAT-file system) • A firmware installation package provided by Riello S.p.A (zip file “905TS02_3.i.17”) OW TO UPDATE THE FIRMWARE The following steps are required to program (update) the touchscreen firmware: 1.
Page 3
FIG. 1 5. On the touchscreen, the window (displayed at Fig. 2) will appear. Press the button on the left FIG. 2 6. In the following window, press the middle button (Fig. 3): Riello SpA - Riello Proprietary and Confidential...
Page 4
7. In the following window, press the button on the left (Fig. 4): FIG. 4 8. Then press the button on the upper left side (Fig. 5) to start the firmware update (Fig. 6): Riello SpA - Riello Proprietary and Confidential...
Page 6
This instruction is referred only to the models listed on chapter 1. Don’t use this instruction or the firmware here mentioned for other Riello boilers. It may cause an irreversible damage of the device. Riello SpA - Riello Proprietary and Confidential...
This manual is also suitable for:
Array 3000Array 2000Array 1500Array 1000Array 4000 canadaArray 3000 canada...
Show all
Need help?
Do you have a question about the ARRAY 4000 and is the answer not in the manual?
Questions and answers