Using Instruction - Heinner HCM-SIL1080 User Manual

www.heinner.com
V.

USING INSTRUCTION

Before first use
For a perfect taste, carry out 2 or 3 boil-processes with fresh water (without coffee). Once all the
water has passed through, switch off the appliance and let it cool down during 5 minutes. Then
repeat the process with fresh water.
Making coffee
●Fill the water tank with the required quantity of water. Ensure that the water level is not lower
than the minimum mark and not higher than indication "MAX". Use fresh, cold water only. The
number of cups can be read on the water tank.
●Insert filter paper size "1X4" if the filter hasn't been used and fill in the desired quantity of
ground coffee.
●Switch on the appliance. Wait until the brewing process is finished and the funnel has run
empty.
● For large cups: takes 5-6g of ground coffee each cup.
Making more coffee straight away?
●If you have made one cup of coffee and wish to make some more straight away, please switch
off the coffee maker and allow at least 5 minutes for it to cool down. Then you can refill the
water tank.
VI. CLEANING AND MENTENANCE
●Always remove the main plug from the wall socket before cleaning the appliance.
●Never immerse the appliance in water.
●You should clean it with a damp cloth.
●The carafe and the filter and the funnel can be washed in hot soapy water.
Descaling
●Descale your coffee maker regularly.
●Operate the appliance as described. However, now use ordinary vinegar to fill the water
tank and do not fill the funnel with ground coffee.
●After descaling let the appliance work twice more with only water to rinse away the
vinegar and scale remainders.
915-1080W, 50/60Hz, 220-240V
4