How To Enable A Humidity And Temperature Sensor; How To View Teamwork Control Information - Huawei NetCol5000-A User Manual

ACC Precision Air Conditioner Controller
User Manual

5.8 How to Enable a Humidity and Temperature Sensor

Context



Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H Sensor.
Step 2 Set the value following Cold-aisle sensor 1 and Cold-aisle sensor 2 to Enable, as shown in
Figure
Figure 5-6 Enabling a humidity and temperature sensor
----End

5.9 How to View Teamwork Control Information

Procedure
Step 1 On the home screen, choose
displayed, as shown in
Issue 02 (2016-11-30)
A humidity and temperature sensor needs to be enabled after it is installed in an aisle.
To enable a sensor, log in as the Admin or Engineer user.
This section describes how to enable Cold-aisle sensor 1 and Cold-aisle sensor 2.
5-6.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
> . The teamwork control information is
5-7.
5 FAQ
52