Exporting Data - Huawei NetCol5000-A User Manual

ACC Precision Air Conditioner Controller
User Manual
If you perform this operation, all logs will be deleted, and device maintenance will be affected.
Exercise caution when doing this operation.
Procedure
Step 1 On the home screen, choose Maint > Log Maint > Delete Logs > Yes to delete all the logs.
----End

4.2.3 Exporting Data

Context
Active alarms, historical alarms, logs, configurations, and run logs can be exported. The
export method for the five data is the same. This section uses how to exporting active alarms
as an example to explain the operation method.
Table 4-1
flash drives to perform data export.
Table 4-1 Recommended USB flash drives
Model
Netac U188
Kingston DT101G2
Before using a USB flash drive, ensure that its data has been scanned by antivirus software
and is secure.
Procedure
Step 1 On the home screen, choose Maint > USB Operations > Export Act. Alarms to enter the
Select Path screen, as shown in
Issue 02 (2016-11-30)
After logs are deleted, the log deletion operation is recorded in the first log that is displayed.
lists USB flash drives with good compatibility. You are advised to use these USB

Before exporting active alarms, historical alarms, logs, and configurations, ensure that the USB flash
drive has been successfully identified. The position of the USB port is shown in

If the USB flash drive has been successfully identified,

If the USB flash drive is not properly connected, the system will notify that the USB flash drive is
not detected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Capacity
4 GB
8 GB
Figure 4-13.
4 Maintenance Guide
Figure 1-2.
is displayed at the status bar.
40