TELESCOPING DRAWBAR
PIN, 1" X 9 1/4"
KLIK PIN
RETRACTED POSITION
Hold the telescoping drawbar in the retracted position
by extending the 1" x 9 1/4" pin horizontally through the
end plates of the outer drawbar section and through the
tube on the inner section between them. Secure with
klik pin.
KLIK PIN
PIN, 1" X 9 1/4"
EXTENDED POSITION
Hold the telescoping drawbar in the extended position by
extending the 1" x 9 1/4" pin vertically through the plates on
the top and bottom surfaces of the outer drawbar section
and through the end plates of the inner drawbar section.
Secure with klik pin.
190rev501
9J698
Page 12A