Troubleshooting; Maintenance And Service - Bosch UniversalHedgeCut 50 Original Instructions Manual

Cut the sides of the hedge first, then the top.
To cut the sides straightly, we recommend cutting from bot-
tom to top in the direction of growth. Younger stems tend to
move outwards when cutting them from top to bottom, res-
ulting in shallow patches or holes in the hedge.

Troubleshooting

Problem Possible Cause
Hedgecutter does not Power turned off
operate
Mains socket faulty
Mains cable damaged
Extension cable damaged
Fuse faulty / blown
Hedgecutter operates Internal wiring of garden tool defective
intermittently
On/Off switch defective
Motor runs but blades Internal Error
remain stationary
Cutting blade hot Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of lubricant
Excessive vibrations/ Machine defective
noise

Maintenance and Service

Maintenance, Cleaning and Storage
Before any work on the product, disconnect supply
u
cord from the mains.
For safe and proper working, always keep the product
u
clean.
Do not place other objects on the garden product.
To ensure safe and efficient operation, always keep the
product and the ventilation slots clean.
Never spray the product with water.
Never immerse the product in water.
Store the product in a secure, dry place, out of the reach of
children.
Do not place other objects on the product.
Keep all nuts, bolts and screws tight to ensure safe working
with the product.
Inspect the product and replace worn or damaged parts for
safety.
Ensure replacement parts fitted are Bosch-approved.
After-sales Service and Application Service
www.bosch-garden.com
Bosch Power Tools
To reach a level finish, fasten a piece of string along the
length of the hedge at the required height and use as an
alignment guide. Cut the hedge just above the string.
Pay attention that no objects such as wires are cut. The
blade or drive can be damaged.
Corrective Action
Turn power on
Use another socket
Check mains cable; if damaged, contact Service
Agent
Inspect extension cable, replace if damaged
Replace fuse
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Have blade sharpened
Have blade inspected/overhauled
Apply lubricant spray
Contact Service Agent.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
English | 7
F 016 L81 788 | (16.08.2019)