Troubleshooting; Malfunctions - Bosch MSGP3L User Manual

en Troubleshooting

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.

Malfunctions

Fault
Pump is not working.
Light unit does not light up.
The light unit lights up red
for 10 seconds every 5
minutes.
The light unit flashes red 10
times every 5 minutes.
30
Cause
The device is standing on a
magnetic metal surface.
Device is not connected to
the power supply.
Ambient temperature
above 40 °C. The overtem-
perature protection has
switched the device off.
Sleep mode is switched on
or lighting has been
switched off manually.
Light unit has an electronic
fault
The device measures a very
high ambient temperature of
36-40 °C.
The pump is blocked or the
impeller is missing.
Troubleshooting
Check whether the location is suit-
1.
able in the long term.
→ "General information", Page 25
Select a different location.
2.
Check whether the power supply is
1.
plugged into a socket.
Check whether the connecting
2.
cable is properly connected to the
docking unit.
Check whether the location is suit-
1.
able in the long term.
→ "General information", Page 25
Close curtains or blinds to lower the
2.
room temperature.
→ "Setting sleep mode", Page 27
1.
→ "Dimming or switching off the
2.
lighting temporarily", Page 28
Disconnect the device from the
1.
power supply for a few hours to re-
set the light unit.
Reconnect the device.
2.
Note: If the fault cannot be eliminated
in this manner, please contact cus-
tomer service.
Check whether the location is suit-
1.
able in the long term.
→ "General information", Page 25
Close curtains or blinds to lower the
2.
room temperature.
Check that the pump impeller is po-
1.
sitioned correctly.
Check that the pump housing is po-
2.
sitioned correctly.