Replacing The Transformer; Replacing The Tp150 Transformer; Replacing The Tp180 Transformer - Fronius TransPocket 150 Service Manual & Spare Parts List

Replacing the transformer

Replacing the
TP150
transformer
Replacing the
TP180
transformer
(1)
Open the housing as described in the
1
section "Opening the TP150 housing"
Remove the BPS1500 PC board as
2
described in section "Removing the
BPS1500 PC board"
Undo the two M5x25 TX25 screws (1)
3
Disconnect and remove the transfor-
4
mer by pushing the locking hooks
Insert the transformer and secure with
5
(1)
two M5x25 TX25 screws
Tightening torque = 3 Nm
Fit the thermal foil, see section "Repla-
6
cing the secondary diode"
Install the BPS1500 PC board as de-
7
scribed in section "Installing the
BPS1500 PC board"
Close the housing as described in sec-
8
tion "Closing the TP150 housing"
Open the housing as described in the
1
section "Opening the TP180 housing"
Disconnect the transformer leads, see
2
section "Removing the BPS 1800 PC
board"
Disconnect and remove the transfor-
3
mer by pushing the locking hooks
Fit the transformer leads as described
4
in the section "Installing the BPS1800
PC board"
Close the housing as described in sec-
5
tion "Closing the TP180 housing"
95