Replacing Components; Safety Inspection; Appendix - Fronius TransPocket 150 Service Manual & Spare Parts List

Replacing com- The "Replacing components" chapter describes how to replace components that
ponents -
-

Safety inspection

This section outlines the safety inspection for the device described in this service manual.
The safety inspection instructions have been drafted in accordance with IEC 60974-4. Ex-
tracts of the requisite measuring methods are documented in Fronius work instruction
PMÜ-01.
Please be aware of the requirements and standards relevant to your country, as the meas-
ured values or steps taken during the tests may vary.
Even if there are no relevant requirements and standards in your country, Fronius recom-
mends that this inspection should still be carried out.
The safety inspection must only be carried out on a fully assembled device.

Appendix

The "Appendix" contains the complete spare parts lists for the devices.
The circuit diagrams are also supplied with the device.
62
have no instructions of their own for replacement and
require detailed replacement instructions