Replacing The Fan; Replacing The Tp150 Fan - Fronius TransPocket 150 Service Manual & Spare Parts List

Replacing the fan

Replacing
the
TP150 fan
92
(1)
(2)
(1)
Open the housing as described in the
1
section "Opening the TP150 housing"
Unplug the fan lead (1) from the
2
BPS1500 PC board and feed it out
Remove the fan by simultaneously pul-
3
ling the locking hooks and the fan
Remove the fan (2)
4
Install the new fan (2)
5
- The arrow on the fan must point
backwards
- The fan leads must be on top and
facing the outside
IMPORTANT! Before installing the fan, ob-
serve the direction of installation and cable
routing.
Plug the fan lead (1) into the BPS1500
6
PC board
Close the housing as described in sec-
7
tion "Closing the TP150 housing"
NOTE! Use the correct fan!
- For power modules earlier
than version V0.8B_D (black
plug slot), use the fan with
item number 43,0006,0314
- For power modules from ver-
sion V0.8B_D (white plug slot
+ plug sleeve), use the fan
with item number
43,0006,0328