Mounting the fan plug connection
Retrofitting the
fan plug connec-
tion with a plug
sleeve
(1)
(1)
(2)
(3)
(3)
WARNING!
TP 150s that have a white fan con-
nector on the BPS1500 PC board
must be retrofitted with a plug
sleeve (42,0405,1476).
Open the housing as described in the
1
section "Opening the TP150 housing"
Unplug the fan lead (1) from the
2
BPS1500 PC board
Take plug sleeve (2) and pull over the
3
fan lead (1)
Plug the fan lead (1) back into the
4
BPS1500 PC board
Slide plug sleeve (2) onto the fan lead
5
(1)
NOTE! Observe the direction of
installation when sliding on the
plug sleeve. The line marking
must be on the top!
Insert fan cable (3) into the strain-relief
6
device
NOTE! Fit fan cable without pre-
tension.
91