Closing The Housing; Closing The Tp150 Housing - Fronius TransPocket 150 Service Manual & Spare Parts List

Closing the housing

Closing the
TP150 housing
96
(2)
(3)
Fit the insulation sheet (3) on the PC
1
(1)
board-side.
Plug in the tab connector of the earth
2
lead (1) and position the cover (2).
Connect the control panel (4) to the
3
BPS1500 PC board
(5)
Fit four TX25 screws (5) to the front of
4
the device
Tightening torque = 3.0 Nm
(4)
(5)
Insert the handle
5
Fit four M5x25 TX 25 screws (6) to the
6
(6)
rear of the device
Tightening torque = 3.0 Nm
(6)
WARNING! The earth lead must
not be kinked or trapped. To en-
sure the lead is not damaged, it
must be pressed down against the
housing.