●
Display Modes
Color Mode
Standard Mode
Advanced Mode
Note
• If you switch between SDR color modes (BT.2020, BT.709, and DCI-P3) and HDR color modes (PQ_BT.2100,
PQ_DCI-P3, and HLG_BT.2100), wait 30 minutes or more after switching the color modes, and then adjust
the monitor.
12
Chapter 2 Basic Adjustments/Settings
Adjust color using the monitor's Setting menu.
BT.2020
See
"Color Mode Setting Values" (page 13)
for each color mode.
BT.709
DCI-P3
PQ_BT.2100
PQ_DCI-P3
HLG_BT.2100
SYNC_SIGNAL
Adjusts the monitor's display using the monitor's SelfCalibration function
or color management software "ColorNavigator 7".
CAL1
Displays the screen adjusted by SelfCalibration or ColorNavigator 7.
CAL2
CAL3
Purpose
for detailed setting values