Table of Contents
Advertisement
Setting of PQ Option and Display
This section describes the setting of PQ Option and the relation between the input signal (10 bits:
0 - 1023) and the brightness displayed on the monitor.
Note
• This relation assumes that the input signal is full range (and that "Input Range" in "Signal" is set to "Full").
●
2
300 cd/m
Clipping, 500 cd/m
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
0
●
2
4000 cd/m
Emulation and 10000 cd/m
2
cd/m
)
4500
4000
3500
3000
2500
2000
1500
1000
500
0
0
22
Chapter 3 Advanced Adjustments/Settings
2
Clipping, and 1000 cd/m
PQ Curve
300 cd/m² Clipping
500 cd/m² Clipping
1000 cd/m² Clipping
693
256
512
637
Input Video Level
PQ Curve
4000 cd/m² Emulation
10000 cd/m² Emulation
256
512
Input Video Level
2
• Set the brightness to the specified value to
display properly.
- Example: When PQ Option is set to 300cd/
2
m
Clipping, set the monitor brightness to
300 cd/m
770
768
1023
2
Emulation (Monitor brightness setting: 1000
• This setting is used for a temporally check.
- Example: When PQ Option is set to
4000cd/m
gradation is equivalent to that of the monitor
with the maximum brightness of 4000 cd/m
In this case, the representation of gradation
is decreased according to the brightness
setting of this monitor because it has the
maximum brightness of 4000 cd/m
768
924
1023
Clipping
2
.
2
Emulation, the representation of
2
.
2
or less.
Advertisement
Table of Contents
