Rear - Eizo ColorEdge PROMINENCE CG3146 User Manual

●

Rear

12
13
14
15
11. Transportation handle
12. Security lock slot
13. Stand
14. Main power switch
15. Power connector
16. Cable holder
17. SDI output terminal (BNC)
18. SDI input terminal (BNC)
11
16 13
17 18
This handle is used for transportation.
Attention
• With help from one other person, firmly grasp and hold the monitor
by the bottom while grabbing the handle, and carefully convey the
monitor so as not to drop it.
Complies with Kensington's MicroSaver security system.
The height and angle cannot be adjusted.
Turns the main power on or off.
: On : Off
Connects the power cord.
Covers the monitor cables.
Attention
• Do not hold the monitor by the cable holder when transporting the
monitor. The cable holder may be damaged, or this may result in
other injury or damage.
The signal input to the SDI input terminal is output.
SDI 1 supports 12G/6G/3G/HD-SDI.
SDI 2, SDI 3, and SDI 4 support 3G/HD-SDI.
Attention
• This product supports through-out (active). When outputting the
signal, turn the main power of the monitor on.
Connects to a device that has SDI output.
SDI 1 supports 12G/6G/3G/HD-SDI.
SDI 2, SDI 3, and SDI 4 support 3G/HD-SDI.
22
23
24
19
20
21
Chapter 1 Introduction
9