Table of Contents
Advertisement
Function
Advanced
Gain
Settings
Black Level
6 Colors
Reset
When the color mode is Advanced Mode (CAL1 / CAL2 / CAL3)
You can set targets for SelfCalibration and execute calibration.
Function
Color Mode
Brightness
Black Level
24
Chapter 3 Advanced Adjustments/Settings
Settings
0 to 2000
The brightness of each color component red, green, and blue is
called Gain. The chromaticity of "white" can be changed by adjusting
the gain.
Note
• Using this function may make some color gradations unavailable for
display.
• The gain value changes according to the color temperature.
• When gain is changed, the color temperature is changed to "User".
0 to 1500
You can adjust the brightness and chromaticity for black by adjusting
the levels of red, green, and blue, or by adjusting all of the black
levels. Display the black test pattern or the background and adjust
the black level.
-100 to 100
The hue, saturation and lightness (brightness) can each be adjusted
for the colors Magenta, Red, Yellow, Green, Cyan, and Blue.
-
Resets any color adjustment values for the currently selected color
mode back to the default settings.
Settings
BT.2020
Switch to the desired mode according to the monitor application.
BT.709
Note
DCI-P3
• For more information on how to switch modes, see
PQ_BT.2100
Switching the Display Mode (color mode)" (page
PQ_DCI-P3
• Regarding "BT.2020 / BT.709 / DCI-P3 / PQ_BT.2100 / PQ_
HLG_BT.2100
DCI-P3 / HLG_BT.2100", see
CAL1
CAL2
CAL3
SYNC_
SIGNAL
Min
Set the brightness that will be used as a calibration target for
2
48 cd/m
to
SelfCalibration.
2
1000 cd/m
Note
Max
• 48 cd/m
cd/m
Min
Set the black level that will be used as a calibration target for
0.2 to 3.5
SelfCalibration.
Description
Description
page
2
2
to 300 cd/m
can be set in increments of 1, and 300
2
2
to 1000 cd/m
can be set in increments of 100.
"2-2.
11).
19.
Advertisement
Table of Contents
