Table of Contents
Advertisement
5-5. Adjusting Brightness of the Power Switch Indicator
The brightness of the power switch indicator (green) while the screen is displayed can be adjusted. The
larger the set value, the brighter the power indicator lights up. On the other hand, the smaller the value,
the darker it becomes. The "Off" setting turns off the power switch indicator.
Setting Range
1 to 7, Off
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "Indicator", then
3. Specify the setting using
4. When the setting is complete, select
5-6. Skipping Unused Display Modes
This function allows you to skip certain display modes when selecting a mode.
Please use this function if you want to limit the modes to be displayed, or avoid changing the display
status randomly.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "Mode Skip", then
3. Select a mode whose setting you want to change, then select
4. Select "Skip" or "-" using
Attention
• Not all modes can be disabled (skipped). Set at least one mode to "-".
5-7. Enabling or Disabling DisplayPort Communication in
Power Saving Mode
Connecting a PC to the DisplayPort connector enables DisplayPort communication, and thus consumes
high power even in the power saving mode. The communication can be disabled by setting "DP Power
Save" to "On". This reduces power consumption in the power saving mode.
Attention
• If "On" is selected, window and icon positions may shift when the monitor is powered back on or returned from
the power saving mode. In such cases, set this function to "Off".
Procedure
1. Select
to turn off the monitor.
2. While touching the leftmost switch (
monitor.
3. Select "DP Power Save" in "Administrator Settings", then select
4. Select "On" or "Off" using
5. Select "Apply", and then select
.
or
.
.
.
or
, then select
.
), touch
or
, then select
.
.
.
.
for more than two seconds to turn on the
.
.
Chapter 5 Configuring Monitor Settings
27
Advertisement
Table of Contents
