Table of Contents
Advertisement
2.
Display "Signal" in the Setting menu, and configure the settings required.
Note
• For more information about basic operation of the Setting menu, see
Menu" (page
15).
1. If the image is not properly displayed, set "Input Color Format" in the "Signal" menu.
If the text including "YCbCr" or "YCC" is displayed in "Signal Information" in the "Signal" menu, the input
signal is YUV. If the text including "RGB" is displayed, the input signal is RGB.
2. If the YUV signal is displayed, "YUV Color Matrix" is set.
Settings for each color mode selected are shown below.
Note
• If the input signal is RGB, use the default setting.
• A conversion constant other than BT.2020 may be applied due to restrictions or settings of your equipment
and tools. If it is the case, configure the settings properly for your equipment and tools.
3. Set "Input Range".
Settings for each color mode and color format selected are shown below.
Color Mode
BT.2020
BT.709
DCI-P3
PQ_BT.2100
PQ_DCI-P3
HLG_BT.2100
Color Mode
BT.2020
BT.709
PQ_BT.2100
HLG_BT.2100
Input Color Format
"3-1. Basic Operation of the Setting
YUV Color Matrix
BT.2020
BT.2020
BT.2020
RGB
YUV
RGB
YUV
RGB
RGB
YUV
RGB
RGB
YUV
Chapter 7 SDR/HDR Settings
BT.709
Input Range
Full
Limited (109% White)
Full
Limited (109% White)
Full
Full
Limited
Full
Full
Limited
53
Advertisement
Table of Contents
