Making Use Of The Usb Hub Function; Connection Procedure - Eizo ColorEdge PROMINENCE CG3146 User Manual

9-3. Making Use of the USB Hub Function

This monitor is equipped with a USB hub. It works as a USB hub when connected to a USB-compatible
external device, allowing the connection of peripheral USB devices.
●

Connection Procedure

1. Connect the USB cable between the USB downstream port of the external device and USB
upstream port of the monitor.
For the location of the monitor's USB Type-B connector, see
2. Connect the peripheral USB device to the USB downstream port of the monitor.
Attention
• This monitor may not work depending on the used external device, OS or peripheral devices. For USB
compatibility of peripheral devices, contact their manufactures.
• When the monitor is in power saving mode, devices connected to the USB downstream port will still work.
Therefore, power consumption of the monitor varies depending on the connected devices, even in the power
saving mode.
• When the main power switch of the monitor is off, a device connected to the USB downstream port will not
operate.
• When the "USB CHARGE Port" setting in "Preferences" is set to "Charging Only", a peripheral device will not
work if connected to the
• Ensure that communication between all peripheral devices connected to the monitor and the external device
is ended before switching the "USB CHARGE Port" setting. When the setting is switched, all communication
will be temporarily interrupted.
Note
• This product supports USB 3.1 Gen 1. When connecting peripheral devices using USB cable that supports
USB 3.1 Gen 1, high-speed data communication is possible.
• The USB downstream port also supports quick charging. This allows you to recharge your smartphone
or tablet in a short period of time. (See
USB upstream port UU200SS
USB cable (USB Type-B - USB Type-A)
(Included)
port.
"USB CHARGE Port" (page
"Rear" (page 9).
USB downstream port
31))
Chapter 9 Reference
65