Table of Contents
Advertisement
7-3. Settings with ColorNavigator 7
You can use ColorNavigator 7 to configure monitor settings suitable for SDR or HDR display. It is
recommended to use ColorNavigator 7 to calibrate the monitor for the following cases.
• To perform regular calibration
ColorNavigator 7 has a function to notify when to perform calibration.
• To verify whether the monitor is properly calibrated
ColorNavigator 7 has a function to verify calibration status.
Note
• For more information about how to perform adjustment by operating only the Setting menu of the monitor, see
"7-2. Setting Procedure" (page
• For more information about ColorNavigator 7, refer to our web site.
(www.eizoglobal.com/products/coloredge/cn7)
●
Setting Procedure
1.
Select a color mode in the Setting menu in the monitor
See step 1 in
"7-2. Setting Procedure" (page 52)
2.
Display "Signal" in the Setting menu of the monitor, and configure the settings
required
See step 2 in
"7-2. Setting Procedure" (page 52)
Note
• See
"List of Setting Items" (page 55)
3.
Start ColorNavigator 7
4.
Point at the color mode selected in the color mode list, right-click, and set the
color mode type to "Advanced"
5.
Set the adjustment target according to the application
For more information, see
●
Target Settings of ColorNavigator 7
Color Mode Type, Brightness, Black Level, Temperature
Color
Mode
BT.2020
BT.709
DCI-P3
PQ_BT.2100
PQ_DCI-P3
HLG_
BT.2100
*1 This item is changed from the default setting.
56
Chapter 7 SDR/HDR Settings
52).
for the list of setting items.
"Target Settings of ColorNavigator 7" (page
Color
Color Mode
Format
Type
RGB
Advanced
YUV
RGB
Advanced
YUV
RGB
Advanced
RGB
Advanced
YUV
RGB
Advanced
RGB
Advanced
YUV
to configure the setting.
to configure the setting.
Brightness
2
(cd/m
)
*1
100
100
*1
100
100
*1
48
*1
1000
*1
1000
*1
1000
56).
Black Level
Temperature
Minimum Value
Minimum Value
Minimum Value
Minimum Value
Minimum Value
Minimum Value
D65
D65
D65
D65
D65
D65
Advertisement
Table of Contents
