Table of Contents
Advertisement
Function
Color Gamut
Red(x) /
Red(y) /
Green(x) /
Green(y) /
Blue(x) /
Blue(y)
Gamut Clipping
Advanced
Limited
Settings
(109% White)
Reset
●
SelfCalibration
Refer to
"4-1. SelfCalibration functions" (page
26
Chapter 3 Advanced Adjustments/Settings
Settings
Native
Set the color gamut that will be used as a calibration target for
®
Adobe
RGB
SelfCalibration.
sRGB
In "Color Gamut", the color gamut defined by each standard
EBU
can be selected.
BT.709
To set a color gamut other than those specified by each
BT.2020
standard, specify the color coordinates of each RGB color, and
SMPTE-C
the display method ("Gamut Clipping") of colors outside the
DCI-P3
color gamut of the monitor.
User
Note
0.0000 to
• When you select "Native" in "Color Gamut", the preset color
1.0000
gamut of the LCD panel is displayed.
• When color coordinates are specified in the color gamut
settings, the color gamut is changed to "User".
On
Off
On
Set whether the brightness range of the input signal is extended
Off
from 16 - 254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for
display.
Note
• This can be set when "1.0 to 2.7" is specified for "Gamma
(EOTF)".
-
Resets any calibration targets for the currently selected color
mode back to the default settings.
36).
Description
Advertisement
Table of Contents
