Table of Contents
Advertisement
2.3.2 Using the Wizard for Basic Configuration
Purpose:
By default, the Setup Wizard starts once the device has loaded. You can follow it to complete the basic
configuration.
Selecting the language:
Steps:
1. Select the language from the dropdown list.
2. Click Apply button.
Operating the Setup Wizard:
Steps:
1. The Start Wizard can walk you through some important settings of the device. If you don't want to use the
Start Wizard at that moment, click Exit. You can also choose to use the Start Wizard next time by leaving
the "Start wizard when device starts?" checkbox checked.
2. Click Next button to enter the Date and Time Settings interface.
3. After the time settings, click Next button to enter the General Network Setup Wizard interface, as shown
in Figure 2.9.
Digital Video Recorder User Manual
Figure 2. 6 Language Configuration
Figure 2. 7 Start Wizard Interface
Figure 2. 8 Date and Time Settings
32
Advertisement
Table of Contents
