www.DataSheet4U.com
Section 2. Setup
2.1
Express Setup Steps
•
Unpack and verify parts against the packing list.
•
Power up PC.
•
Install HEW by running setup file.
•
Power up the CE2000-H8S/2238 emulator.
•
Connect USB cable from PC to the emulator within 10 seconds. Otherwise, the CE2000-H8S/2238
emulator will go into Self Test mode.
•
Run HEW.
The following topics detail the essential steps before proper emulation can be started.
Power Supply Input
USB Interface
Figure 2-1
Basic Setup of CE2000-H8S/2238 Emulator
User Connector
-
+
PC I/F
PC USB Connector
Figure 2-2
Power Supply
Compact Emulator
PWR RUN
POWER Status LED
-RED: Power On
-ORANGE: Self Test
-ORANGE: PC Detection
-BLINK: Self Test Cycle ended
Compact Emulator
9
RUN Status LED
- RED: Self Test Failed
- GREEN: Run