www.DataSheet4U.com
Clock selection
Execution time
measurement
User Cable interface
Voltage Follower
Power Supply
Environmental
Field Upgrade
Items
•
Software selection of 2 types of clocks:
•
User system clock (via user cable)
•
Emulator internal clock 2−16 MHz at 100KHz
resolution
•
Measure the start (run) till end (break) of an execution.
•
Resolution: 50ns
•
No upper limit
•
Two fine-pitch user cable assemblies (KEL-8822E-080-
171-040-AC) are used to interface to two 1.27mm pitch
plug (KEL-8830E-080-170S) on both sides of the
emulator and user target. (Provided in package)
•
Selected
microcomputer series are also available. (Not in
package)
•
Automatic tracking of the target system supply voltage
to ensure that the emulator draws no power.
•
Power Adaptor Input: 100-240 Vac, 50-60 Hz
•
Emulator Voltage
•
Current consumption : 2.6A (max)
•
Operating Temperature : 10ºC to 35ºC
•
Humidity
•
No condensation
•
No corrosive gas
•
Re-programming of emulator logic and flash OS via
USB interface.
Specifications
actual
footprint
user
: 5V Regulated
: 30% to 85% RH
6
cables
for
each