Table of Contents
Advertisement
8.7.6
Transferring percentage values
Percentage values with DPT 5.001 are transferred to KNX as 1-byte values and must
therefore be rescaled so that they can be optimally processed further as LOGO! analog
values.
Image 8-24
KNX data type / LOGO! data type
KNX data type
1 byte 0...100% - DPT 5.001
See also
Value scaling of the channels (Page 48)
Response upon loss of KNX bus voltage (Page 51)
Response after startup of LOGO!, CMK2000 or KNX (Page 51)
CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
Data transfer from KNX to LOGO!: Percentage values
LOGO! data type
1-byte variable memory
Configuring and commissioning using ETS
8.7 Data transfer KNX to LOGO!
73
Hide quick links:
Advertisement
Table of Contents
