Table of Contents
Advertisement
Glossary
Actuator
KNX actuators convert received commands into actions. Examples: Actuators for dimmers,
shutters/blinds or switches
Data point type (DPT)
ETS
ETS (Engineering Tool Software) is vendor-independent software for commissioning all KNX
products which are developed and marketed by the KNX Association.
For further information, see www.knx.org.
KNX
KNX is a global standard for home and building control installations. KNX allows flexible
networking of all components of home and building control installations using the two cores
of the bus cable.
KNX two-wire
Several transmission media and procedures are available for the KNX bus. With the KNX
two-wire, data transfer is over a twisted two-wire data cable. The bus nodes are also
provided with the KNX operating voltage over this bus cable.
LOGO!
LOGO! is the universal logic module from Siemens. You can use LOGO! to solve all tasks
associated with home and building control installations, e.g. stairway lighting, outdoor
lighting, sun blinds, shutters, shop window lighting etc. It additionally offers solutions for
control cabinet installations and for the manufacture of machines and appliances, e.g. gate
controls, air conditioning systems, and industrial water pumps.
LOGO! Soft Comfort
LOGO! Soft Comfort is the LOGO! programming software with which you can create, test,
modify, save and print the switching programs on your PC rapidly and conveniently.
CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
87
Hide quick links:
Advertisement
Table of Contents
