Sending Float Values - Siemens LOGO! CMK2000 Operating Instructions Manual

8.7.8

Sending float values

Image 8-26
KNX data type / LOGO! data type
KNX data type
2-byte float value - DPT 9.xxx
See also
Value scaling of the channels (Page 48)
Response upon loss of KNX bus voltage (Page 51)
Response after startup of LOGO!, CMK2000 or KNX (Page 51)
CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
KNX to LOGO! float values
Configuring and commissioning using ETS
8.7 Data transfer KNX to LOGO!
LOGO! data type
2-byte variable memory
75