Sending Float Values - Siemens LOGO! CMK2000 Operating Instructions Manual

Configuring and commissioning using ETS
8.6 Transfer of data from LOGO! to KNX
8.6.7

Sending float values

Image 8-16
LOGO! data type / KNX data type
LOGO! data type
2-byte variable memory
See also
Value scaling of the channels (Page 48)
Value update with data transfer from LOGO! to KNX (Page 47)
Response after startup of LOGO!, CMK2000 or KNX (Page 51)
66
Data transfer LOGO! to KNX: Float values
KNX data type
2-byte float value - DPT 9.xxx
Operating Instructions, 11/2015, A5E34877550B/001
CMK2000