Pairing Of Wireless Unit; Pairing Procedure Of Wireless Unit - SMC Networks EX600-WEN Operation Manual

5. Pairing of wireless unit

5.1. Pairing procedure of wireless unit

: Login to the Administrator mode to change to pairing mode.
Refer to 3.1.1 Login to administrator mode (page 13).
(1) Change the mode of the Wireless Remote unit to Pairing mode.
(1-1) Change the pairing setting of the Wireless Remote unit to "Pairing enable".
(1-2) Reflect the change by clicking Reset module or by re-supplying power.
: After switching the operation mode to Pairing mode, check that the W-NS LED on the wireless unit flashes in green and red alternately.
Refer to the Operation Manual for details of LEDs.
-70-
No.EX※※-OMV0017-C