Fuji Xerox Versant 3100 Press Printer Unit Manual page 20

 Custom size
When you use non-standard size paper and long paper, from one of the Stock Library, select [Custom] for
[Size] to specify the paper size using [Width] and [Height].
Printer Unit Trays (1 - 3)
Bypass Tray (5)
High Capacity Trays (6 - 9)
Inserter Tray (T1)
For Bypass Tray, paper size 146.0 - 147.9 mm landscape or larger can be loaded but the image quality and

paper feed performance cannot be guaranteed.
Important
Long paper has the following restrictions:

- Only one sheet can be loaded. (Image quality and paper feed performance cannot be guaranteed when
multiple sheets are loaded.)
- The 2 sided and the printing in reverse side (changing the side to output) are not available.
- Available Paper types are [Plain], [Film], and [Recycled]. You cannot select [Matte Coated].
When GBC AdvancedPunch Pro is installed, the image quality and paper feed performance cannot be guar-

anteed for the papers 488.1 mm landscape or larger.
Note
Use Postcard Kit for paper size 181.9 mm portrait or smaller in High Capacity Trays.
Refer The printer defines "Image Printable Area" and "Assured Image Area" for printing. For detailed information
about the Image Printable Area and Assured Image Area, refer to "1.3 Image Printable Area and Assured
Image Area" (p.15).
20
Printer Unit Manual
LEF: 139.7 - 330.2 mm
SEF: 182.0 - 488.0 mm
LEF: 98.0 - 330.2 mm
SEF: 148.0 - 660.4 mm
LEF: 98.0 - 330.2 mm
SEF: 148.0 - 488.0 mm
LEF: 182.0 - 297.0 mm
SEF: 182.0 - 488.0 mm