Fuji Xerox Versant 3100 Press Printer Unit Manual page 32

1.
Hold the center of the paper guides and slide them to
the desired paper size.
Important
2.
Fan the paper well and insert it along the paper
guide all the way until it touches the back, with the
printed side facing up.
Important
3.
When loading a non-standard size paper, slightly move the paper guides to the desired
paper size.
Special Media Setting
 Transparency
Loading side: Load sheets with the printed side facing up.
 Hole punched paper
Orientation: Place the holes of paper on the right side when you face the front side of printer.
 Precut tab
Orientation: Place the tabs of paper on the left side when you face the front side of printer.
 Postcard
Orientation: SEF
 Envelope
Loading side: Load sheets with the printed side facing up.
Direction with the flap open: Place the flap of Envelope on the left side when you face the front side of
Direction with the flap closed: Place the flap of Envelope on the right or near side when you face the front
Note
If envelopes are loaded with the flaps unfolded, the size will not be automatically detected as standard

size.
Fold the flaps when loading self-seal envelopes.

If you place the flap of envelope closed on this side, a failure in printing might occur on the rear edge of

papers depending on the arranged images.
32
Printer Unit Manual
If the distance between the guides is too long or short
relative to the paper, paper jams may occur.
Do not load paper above the maximum fill line. It
may cause paper jams or machine malfunctions.
printer.
side of printer.