2.3.2
Loading paper in High Capacity Trays
The Trays 6 and 7 are refilled in the same way.
Note
The 2nd High Capacity Feeder C1-DS (Trays 8 and 9) is also refilled in the same way.
Images are printed on the face side of the loaded paper.
Up to 2,000 sheets (Colotech+90) can be loaded to each Tray.
Refer
For detailed information about the Bypass Tray (5), refer to "2.3.3 Loading paper in Bypass Tray" (p.31).
Checking Remaining Paper Level
Remaining paper level can be checked with the paper level indicator lamp.
Note
If an incorrect level is indicated, pull out the Tray, make sure the plate is low-
ered, and then push the Tray into the machine slowly and firmly.
After setting the paper, it may take some time for the lamp to illuminate.
This is because the printer is raising the bottom plate or setting up the Air
Assist function, and thus not a malfunction.
The top active indicator lamp lights when the corresponding Tray is active. The
four center lamps (1=25%) indicate the amount of remaining paper. When all
of the four lamps turn off, Tray becomes empty and paper empty indicator
lamp lights.
Feed Direction
Printed side
Active
Paper Level
Paper Empty
Chapter 2 Load and Output Paper
27