Optical Data Interface Commands; Odi:achannels; Odi:port:count; Odi:port<N>:Capability:direction - Keysight Technologies M8131A User Manual

Optical Data Interface Commands

:ODI:ACHannels?

Returned Format

:ODI:PORT:COUNt?

Return Format
:ODI:PORT<N>:CAPability:DIRection?
Return Format
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
The Optical Data Interface subsystem is used to setup the optical ports of
the M8131A. These commands are only available with option -STR. An
example sequence of commands to set up the ODI ports for data
streaming is shown in the description of the
product implements a subset of the "Application Programming Interface
for Test and Measurement - Optical Data Interface, Revision 2.0".
The complete specification can be found here:
http://axiestandard.org/odispecifications.html
Command
:ODI:ACHannels?
Description The query returns the usable optical channels as a string. The channel
names are separated by commas. The returned value depends on the
installed options, the selected sample rate and the FPGA mode.
<N> An integer to select the ODI port, 1-4.
[:ODI:ACHannels] {active_channels_string}<NL>
Query
:ODI:PORT:COUNt?
Description The query returns the total number of ODI channels.
[:ODI:PORT:COUNt] <ports><NL>
Example
:ODI:PORT:COUNt? -> 4
Query
:ODI:PORT<N>:CAPability:DIRection?
Description The query returns the list of data transfer directions supported by this port.
[:ODI:PORT<N>:CAPability:DIRection]
<direction-list><NL>
Remote Programming
:STReam command. This
4
139