Keysight Technologies M8131A User Manual page 64

3 M8131A User Interface
64
• DDC Center Frequency- Sets the digital down conversion center
frequency. This option is only available when the mode is selected as
"DDC". Please note that you are only allowed to enter the following
DDC IF values; 0 MHz, 250 MHz, 500 MHz, 750 MHz, 1 GHz & 1.25
GHz.
• Frontend Settings - The forntend settings are available, depending
upon the installed options (see
settings allow you to set the signal offset and range.
Instrument Options
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
on page 18). These