Trigger:edge:slope; Trigger:level:external; Trigger:level[:Channel] - Keysight Technologies M8131A User Manual

4 Remote Programming

: TRIGger:EDGE:SLOPe

Returned Format

:TRIGger:LEVel:EXTernal

Returned Format

:TRIGger:LEVel[:CHANnel]

Returned Format
150
Command
:TRIGger:EDGE:SLOPe {POSitive | NEGative}
Description The command sets the slope of the trigger source. The slope setting is
always the same for all trigger sources.
POSitive Trigger on a rising edge.
NEGative Trigger on a falling edge.
Query :TRIGger:EDGE:SLOPe?
The query returns the current setting for the trigger source.
[:TRIGger:EDGE:SLOPe] {EXTernal | CHANnel<N>}<NL>
Command
:TRIGger:LEVel:EXTernal <level>
Description The command specifies the trigger level when the external trigger input is
used as trigger source.
<level> The trigger level in Volts as a floating point number.
Query :TRIGger:LEVel:EXTernal?
The query returns the current trigger level.
[:TRIGger:LEVel:EXTernal] <level><NL>
Command
:TRIGger:LEVel[:CHANnel] CHANnel<N>, <level>
Description The command specifies the trigger level when an analog input channel is
used as trigger source.
<N> An integer, 1-4.
<level> The trigger level in Volts as a floating point number.
Query :TRIGger:LEVel[:CHANnel]? CHANnel<N>
The query returns the current trigger level.
[:TRIGger:LEVel[:CHANnel]] <level><NL>
Keysight M8131A 16/32 GSa/s Digitizer User's Guide