LEGRAND Server Technology PRO3X User Manual page 39

Sequence Setup
You can use the power-on sequence option to define a sequence/order for powering on the PDU outlets. User-
defined sequences can eliminate in-rush current when multiple PDUs are powered on at the same time.
1. From the Outlets page, select the Sequence Setup option. The Outlets Sequence page displays:
Note: The default outlet sequence is 1-n, as highlighted above for the 36 outlets in the PRO3X PDU. (Only outlets
1-19 are shown in this partial screen capture.)
2. Use the following controls to change the sequence of
Outlets Sequence - Controls
Move to top of list. Move a specific outlet to the top of the sequence list to
power-on first.
Move up. Move a specific outlet up in the power-on sequence list.
Move down. Move a specific outlet down in the power-on sequence list.
Move to bottom of list. Move a specific outlet to the bottom of the sequence
list to power-on last.
Reset. Reset the power-on outlet sequence back to the default 1-n.
outlets.
PRO3X User Guide – Features
39 of 61