LEGRAND Server Technology PRO3X User Manual page 23

About the Link ID
The PDU ID "1" is automated and reserved internally for the master unit. The master unit's PDU ID "1" cannot be
edited.
The Link ID "2-8" is available for you to select as the ID for each of the link units you add to chain. From the Link ID
drop-down, you can select the desired Link ID to manage the link units in the chain. Once selected, the Link ID
cannot be edited.
What data does the master unit manage for the link units?
The master unit manages the following functions for the entire chain of linked units:
•
User management and authentication – configured only on the master.
•
Date and time – the master synchronizes its date and time settings to link units. If NTP is not used, then
the synchronization interval is every 10 minutes.
•
Device settings – only the master device settings are configurable, except for Network Settings. Some
settings will be synced to link units. The serial port is configurable for the master only; link units use the
console.
•
Data model settings – such as outlet names, thresholds, peripherals, etc., are configured on the master
and stored on link units.
•
Lua scripts – Communication with link units in a Lua script is possible.
PRO3X User Guide – Features
23 of 61