Lutron Electronics HomeWorks Protocol Manual page 84

ST
ST
Syntax
ST, <time>
Processor Responds
Processor Time: <time>
Parameter Description
time current time of day in 24 hour format
Description
Sets the system time. This will update the time on all processors in the system.
Example
Set the time to 2:34 PM
L232> ST, 14:34:00
Processor Time: 14:34
See Also
RST - Request system time
SD - Set system date
RSD - Request system date
http://www.lutron.com/hwi/Help/l232/st.htm [7/3/03 1:20:05 PM]
Format
HH:MM:SS in 24 Hour format
see time address formatting
the seconds must be specified
Set Time
description