Lutron Electronics HomeWorks Protocol Manual page 37

Dimmer Button Hold Monitor String
DBH Monitor String
Syntax
DBH, <address>, <button number>
Parameter Description
address system address of the H48 dimmer/switch see
button button number that was held
number
Description
The DBH monitor string is output from a processor when the tap switch for an H48
dimmer/switch is held. This string is not generated when the tap switch for a D48 or RF
dimmer/switch is held.
Example
Someone holds the H48 tap switch on processor 1, link 4, router 1, bus 3, dimmer 2.
DBH, [01:04:01:03:02], 1
See Also
DBP Monitor String
DBR Monitor String
DBDT Monitor String
KBMON - Keypad button monitoring on
KBMOFF - Keypad button monitoring off
http://www.lutron.com/hwi/Help/l232/dbh_mon.htm [7/3/03 1:19:47 PM]
Dimmer Button Hold
Monitor String
Format
device address formatting
description
1