Lutron Electronics HomeWorks Protocol Manual page 79

CCOCLOSE
CCOCLOSE
Syntax
CCOCLOSE, <address>, <relay number>
Parameter Description
address system address of the CCO
relay number relay number to close
Description
Closes a specific CCO relay
Note - The processor does not verify that the given address is ACTUALLY a CCO address. If
the address is a normal keypad, the command may temporarily change the state of the leds on
that keypad.
Example
Close relay 3 on processor 2, link 4, CCO address 6
L232> CCOCLOSE, [2:4:6], 3
See Also
CCOOPEN - Open a CCO relay
CCOPULSE - Pulse a CCO relay
http://www.lutron.com/hwi/Help/l232/ccoclose.htm [7/3/03 1:20:03 PM]
CCO Relay Close
Format
[processor : link : address]
see device address formatting
1 - 8
description