Lutron Electronics HomeWorks Protocol Manual page 58

RAISEDIM
RAISEDIM
Syntax
RAISEDIM, <address 1>, ..., <address n>
Parameter Description
address system address of zones to fade
Description
Starts raising one or more system dimmers
Example
Start raising processor 1, link1, MI address 0, RPM module 2, zone 3
L232> RAISEDIM, [1:1:0:2:3]
See Also
LOWERDIM - Lower a system dimmer
STOPDIM - Stop a dimmer raise/lower
FADEDIM - Fade a system dimmer
FLASHDIM - Flash a system dimmer
STOPFLASH - Stop flashing a system dimmer
http://www.lutron.com/hwi/Help/l232/raisedim.htm [7/3/03 1:19:55 PM]
Raise a dimmer
Format
[processor : link : address]
maximum of 10 address per command
see device address formatting description