Lutron Electronics HomeWorks Protocol Manual page 11

GETBAUD
GETBAUD
Syntax
GETBAUD, <port address>
Processor responds with the following
RS232 port baud rate on port <port address> is <baud rate>
Parameter
port address (optional)
baud rate
Description
Requests the RS-232 port baud rate setting for an RS232 port in the system.
Example
Get RS-232 port baud rate for the port you are connected to
L232> GETBAUD
RS232 port baud rate on port 01:03:001 is 115200
Example
Get RS-232 port baud rate for link 7 on processor 2
L232> GETBAUD, 2:7:1
RS232 port baud rate on port 02:07:001 is 115200
See Also
SETBAUD - Set RS-232 port baud rate
http://www.lutron.com/hwi/Help/l232/getbaud.htm [7/3/03 1:19:39 PM]
Get RS-232 port baud rate
Description
the port address the request is
for
the RS-232 port baud rate
Format
pp:ll:aaa (see RS232 Port
Addressing) This parameter is
optional. If omitted, the
request will default to the port
that receives the command
the processor will respond
with one of the following
300, 600, 1200, 2400, 4800,
9600, 19200, 38400, 57600,
115200