LEGRAND Inform SINUS EVO User Manual page 3

Description of the Symbols Used in the Manual
This symbol points out the instructions which are especially important.
This symbol points out the risk of electric shock if the following instruction is not followed.
This symbol points out the instructions, which may result with injury of the operator or damage of the
equipment if not followed.
All packing material must be recycled in compliance with the laws in force in the country where the
system is installed.
PB: PROTECTIVE BONDING
PE: PROTECTIVE EARTH
Description of the Abbreviations Used in the Guide
UPS: Uninterruptible Power Systems
EPO: Emergency Power Off
RS232: Serial
Protocol
SNMP: Simple
Management Protocol
CVCF: Constant Voltage Constant
Frequency
V: Voltage
A: Ampere
P: Power
Communication
Network
For Input, Output and Manual
Bypass Circuit Breaker;
"I" (ON): Closing the Circuit
"0" (OFF): Opening the Circuit
For Battery Circuit Breaker;
Active (ON/I): Closing the Circuit
Passive (OFF/0): Opening the Circuit
III