Table of Contents
Advertisement
3. REQUIREMENT
3.1. Transportation
The UPS must be placed and stand in a vertical position throughout the transportation.
The equipment shall be packed properly during transportation. Therefore it is recommended to keep
the original package for future need.
All packing material must be recycled in compliance with the laws in force in the country where the
system is installed.
In order to profit from optimal ventilation, the side panels must remain in place for UPS with internal
battery.
The UPS should be mounted on a concrete surface and non-combustible surface.
3.2. Placement
This product meets the safety requirements for devices to be operated in restricted access locations according to EN
60950-1 safety standard, which states that the owner should guarantee the following:
•
UPS is not designed for outdoor application.
•
The equipment and the batteries should not be exposed to direct sunlight or placed near to a heat source.
Recommended operating temperature and humidity values are listed on the
•
Avoid dusty environments or areas where dust of conductive or corrosive materials is present.
•
Recommended environmental humidity condition is between 20-95% (non-condensing).
•
3.3. Storage
Please store the UPS in an environment where the temperature is between -25°C + 55°C, no receipt of direct sunlight,
far from the heating, in a dry place.
Environmental humidity must be between 20-95% (non-condensing).
Recommended storage temperature, humidity and altitude values are listed on the
section.
If the batteries will be stored for longer than 6 months, they shall be charged periodically. Charge period depends on
the storage temperature, as shown below:
Every 9 months if the temperature is below 20°C,
Every 6 months if the temperature is between 20°C and 30°C,
Every 3 months if the temperature is between 30°C and 40°C,
Every 2 months if the temperature is over 40°C
Appendix-1 Technical
Specifications.
Appendix-1 Technical Specifications
8
Hide quick links:
Advertisement
Table of Contents
