Remote Terminal - Emerson Dixell iChill IC200D EVO Series Installing And Operating Instructions

Push for 1 second during the
programming when the display
visualize Pr1 or Pr2 or Pr3
Push once
Pushing once during the
programming
Push once
Push once
Push once
Push for 3 seconds
Pushing once during the
programming
3.13 KEY COMBINANTION
KEY
+
+
+

4. REMOTE TERMINAL

The display visualization and the button functions are the same of the Ichill, then refer to previous chapters
of the quick reference guide.
1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10
ACTION
Push for 3 seconds together
Only in Pr3 level: push SET and
DOWN key
Push once together
Push 5 seconds in heat pump
mode
Only in Pr3 programming level:
push SET and then the MENU key
1 time shows the Pr2 programming level
2 times shows the Pr3 programming level
To read probes value
To change the group of parameters, to change the
parameter, to change the value of the parameter
To turn ON or turn OFF the controller (in chiller or
heat pump depending from CF58 parameter)
To turn ON or turn OFF the controller (in chiller or
heat pump depending from CF58 parameter)
To enter the function Menu
To set the clock (controller with clock on board)
To exit from a group of parameter
Enter the programming parameters
Select the parameter level visibility Pr1 / Pr2 / Pr3
Exit the programming parameters
Manual defrost
In Pr3 defines if the parameter can be modified or
not in the other levels.
VI622
IC200D
FUNCTION
12/192